CTR Corporation (dba CTR Group)
https://cdn.haleymarketing.com/templates/62526/logos/logo-socialmedia-ctrc.png
http://www.ctrc.com
http://www.ctrc.com
USD
25.00
28.00
HOUR
true
SALARY RANGE: $25-$28
REPORTS TO: Manager, Supervisor, Foreman
JOB DESCRIPTION
SUMMARY/OBJECTIVE
The Machinist JM2 to gain competency in the operation of machinery associated with the manufacturing process.
ESSENTIAL FUNCTIONS / DUTIES
Operate machine shop machinery and equipment.
Reads job specifications to determine machine adjustments and material requirements
Be competent in setup and setting of machinery offsets
Deburr and hand finish parts
Clean shop
Track material PO# s
Follow written and verbal instructions
Must adhere to a promote ALL company safety policies. Wear all required PPE when in Production areas and promote a clean and safe work environment.
Ensure that employees assigned with Firewatch duties are in place and ready prior to begin hot work
Fill out Job JSA forms
PHYSICAL DEMANDS
The Machinist JM2 must be able to meet and successfully perform the essential functions of this job. The following physical demands are representative to the position.
The position is active and requires extensive standing, walking, sitting, bending, and kneeling. Along with such movements, employee is required to lift parts/machinery of up to 75 pounds. Additional demands are listed below:
* Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions
KNOWLEDGE / SKILLS
Must be good at math
Ability to understand English verbal and written instructions
Ability to recognize machinery problems, and ask for guidance
Employee must be able to utilize measuring equipment
Make knowledgeable decisions regarding safety and company standards and policies
Able to operate various hand tools
COMPETENCIES
Communication Proficiency
Flexibility (Job duties & schedule)
Work well with others in all areas where SCW&M is performing work
SUPERVISORY RESPONSIBILTY
Machinist JM2 position has no supervisory responsibilities.
POSITION TYPE / HOURS OF WORK
This is a full-time position, 40 hours per week. Schedule is Monday- Friday, 6: 00 a.M. To 2: 30 p.M. / 2: 30 p.M. To 11: 00 p.M. (swing shifts dependent on work load). Occasional overtime and weekend work may be required based on production needs.
REQUIRED EDUCATION AND EXPERIENCE
Must have a minimum of 2-3 years of machine shop experience.
Must be able to speak and understand English
WORK AUTHORIZATION CLEARANCE
For E-verify and contract security purposes (including ship access lists), all employees MUST present a valid export document. Acceptable documents are U.S. Birth Certificate, Certificate of Naturalization, Passport, Passport Card and Permanent Resident Card.
OTHER
Please consider that duties, responsibilities, and all other points specified in this description can change at any time with or without notice.
Inside Machinist
Chula Vista, CA 91911 US
Posted: 01/18/2023
2023-01-18
2023-04-22
Industry: Ship Yard / Repair
Job Number: 10276
Pay Rate: $25.00 - $28.00
Job Description
SALARY RANGE: $25-$28
REPORTS TO: Manager, Supervisor, Foreman
JOB DESCRIPTION
SUMMARY/OBJECTIVE
The Machinist JM2 to gain competency in the operation of machinery associated with the manufacturing process.
ESSENTIAL FUNCTIONS / DUTIES
PHYSICAL DEMANDS
The Machinist JM2 must be able to meet and successfully perform the essential functions of this job. The following physical demands are representative to the position.
The position is active and requires extensive standing, walking, sitting, bending, and kneeling. Along with such movements, employee is required to lift parts/machinery of up to 75 pounds. Additional demands are listed below:
- Able to lift, carry, and or push up to 50 75 lbs. Throughout the shift (including overtime)
* Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions
KNOWLEDGE / SKILLS
COMPETENCIES
- Follow verbal/written instructions
- Able to work independently
- Teamwork orientation
SUPERVISORY RESPONSIBILTY
Machinist JM2 position has no supervisory responsibilities.
POSITION TYPE / HOURS OF WORK
This is a full-time position, 40 hours per week. Schedule is Monday- Friday, 6: 00 a.M. To 2: 30 p.M. / 2: 30 p.M. To 11: 00 p.M. (swing shifts dependent on work load). Occasional overtime and weekend work may be required based on production needs.
REQUIRED EDUCATION AND EXPERIENCE
WORK AUTHORIZATION CLEARANCE
For E-verify and contract security purposes (including ship access lists), all employees MUST present a valid export document. Acceptable documents are U.S. Birth Certificate, Certificate of Naturalization, Passport, Passport Card and Permanent Resident Card.
OTHER
Please consider that duties, responsibilities, and all other points specified in this description can change at any time with or without notice.